Lilygo T-Deck Plus Belt Clip Holster, Set of 2, Meshtastic and MeshCore Hip Carry with Stainless Hardware

A rugged hip holster that keeps your Lilygo T-Deck Plus within instant reach, built for hikers, hunters, ham operators, and off-grid mesh users.

When a mesh message lands mid-hike, on a hunt, or during a SAR call, you shouldn't have to dig through a pack to see it. This clip slides securely onto your belt and holds the T-Deck Plus snug against your hip in portrait orientation, so you can pull it off, check it, and drop it back in with one hand. No pocket fishing, no zipper fumbling.

Every set is made to order in Quebec, Canada, printed in the colour you pick and typically dispatched within 1 to 3 business days, so you are not waiting on a warehouse to restock a niche accessory.

The clip is built for real outdoor use. The body material holds up to hot vehicle interiors and cold-weather carry better than standard PLA, and it shrugs off the odd bump against a doorframe. Instead of a flimsy plastic snap-fit that fatigues over time, the mounting point uses a real 1/4-20 stainless steel thread (the same standard used on camera tripods), so it stays serviceable and outlasts everyday carry.

A side access hole lets you reach the tension nut with the included hex wrench, and a friction fit plus nut-tensioned design keeps the device from rocking loose during normal walking, hiking, and bending.

🎯 Designed For

• Meshtastic and MeshCore users running the Lilygo T-Deck Plus (keyboard version)
• Ham radio operators, field day setups, and off-grid communicators
• Hikers, hunters, preppers, and search and rescue volunteers
• Anyone who wants their T-Deck on their hip instead of buried in a bag

✅ Features

✔ Portrait hip carry keeps the device visible and one-hand accessible

✔ Draw and re-holster one-handed, so you can read a message without stopping or setting down a pack

✔ Barely-there on the belt, so you feel the device on your hip, not the holster

✔ Metal threaded mounting point instead of plastic threads, so it stays serviceable and the hardware is replaceable

✔ Side access hole lets you retension the clip with the included wrench, no disassembly

✔ Friction fit plus nut tension holds the device firmly through walking and bending

✔ A spare always on hand, kit out a second belt or leave one in the pack

📦 What's Included

• 2 x belt clips, both printed in the single colour you select at checkout. If you need a custom colour, let me know.
• 1 x mounting kit: 1/4-20 x 1/2 inch black stainless steel low profile hex screw, 1 inch black stainless steel washer, and hex wrench
• One mounting kit is supplied per order, not per clip, because the hardware transfers in seconds between the two clips (the second clip is there as a spare or for a second belt). Message me if you want a second kit added.
• Device is NOT included

🛠️ Details

• Body: PETG, FDM printed with a maximum-strength profile
• Colour: choose one of the four colour swatches shown in the variant selector (black, grey, white, blue), and note that shade can vary slightly between filament batches
• Hardware: 304 black stainless steel, corrosion resistant
• Finished size: 54 mm x 22 mm x 32 mm (approximately 2.1 in x 0.87 in x 1.26 in)
• Weight: approximately 15 g (0.5 oz) per clip without hardware
• Fits a 1 3/4 inch belt as standard; message your width for a custom fit at no extra cost
• Made to order, printed after you order and typically dispatched in 1 to 3 business days

❓ FAQ

Q: Will it fit a T-Deck that isn't the Plus, or one in a case? A: The clip is modelled around the bare Lilygo T-Deck Plus (keyboard version), so a different model or an added case may change the fit. Message me before ordering and I'll tell you honestly whether it will work.

Q: Can I mount it to something other than a belt? A: The mounting point is a standard 1/4-20 stainless thread, the same size used on camera tripods, so it pairs with 1/4-20 hardware and adapters you already own.

Q: How do I order a custom belt width? A: Send me your belt width in a message with your order and I'll print the clip to match, at no extra charge.

Q: What if the device feels loose after a while? A: Use the included hex wrench through the side access hole to retension the nut, which restores the grip without any disassembly.

⚠️ Please Note

Each clip is 3D printed to order, so slight layer texture is a natural characteristic of the process and colour may vary a little between filament batches. For extreme activity such as running, climbing, or mountain biking, a secondary tether is recommended.

Care is simple: wipe the clip with a damp cloth and mild soap, let it dry, and keep solvents and abrasive cleaners away from the printed surface. The material copes well with daily sun and hot vehicle interiors, but months of constant, direct UV exposure can gradually dull the colour and reduce toughness, so store the clip indoors or in a pack when it is not on your belt for best long-term life. If an item arrives damaged or doesn't fit your device, message me with photos and I'll replace or refund it.