{"product_id":"wio-tracker-l1-pro-meshtastic-stand","title":"Wio Tracker L1 Pro Meshtastic Desk Stand with Custom Callsign Plate, Charges in Place","description":"\u003cp\u003e\u003cstrong\u003eA custom desktop dock that turns your Seeed Wio Tracker L1 Pro into a proper, always-on Meshtastic node with your callsign on the front.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe L1 Pro is built for the field, but most of the time it lives on a desk: at the home base, at the club, at the repeater site, or on the workbench while you test a mesh route. This stand cradles the device at an angle that puts the \u003cstrong\u003eOLED screen at eye level\u003c\/strong\u003e, so you can read mesh status, GPS lock, and incoming messages at a glance without picking it up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to order with your text:\u003c\/strong\u003e printing starts within 1 to 3 business days and your parcel is dispatched within 3 to 5 business days of your order.\u003c\/p\u003e\u003cp\u003eThe external SMA antenna stays attached and \u003cstrong\u003epoints straight up\u003c\/strong\u003e out of the top of the stand. No removing it, no 90 degree adapters, no RF compromise. Even a longer high-gain antenna works the same way as long as you give it some vertical clearance.\u003c\/p\u003e\u003cp\u003eCharging is just as clean. A \u003cstrong\u003ebuilt-in side cutout\u003c\/strong\u003e lines up exactly with the L1 Pro's USB-C port, so a regular USB-C cable plugs straight in with no adapter and no awkward angle. The device charges and operates at the same time, so you can leave it docked permanently as a fixed 24\/7 mesh node.\u003c\/p\u003e\u003ch4\u003e🎯 Designed For\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eSeeed Wio Tracker L1 Pro\u003c\/strong\u003e (the version with the OLED display and built-in battery)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eMeshtastic users running an L1 Pro as a fixed home node\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eHam radio operators experimenting with LoRa\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eOff-grid communicators and preppers building a comms shelf\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eAnyone tired of their tracker lying flat with the antenna pointing sideways\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e✅ Features\u003c\/h4\u003e\u003cp\u003e✔ \u003cstrong\u003eTilted cradle, not a dead-vertical slot\u003c\/strong\u003e, so pressing the buttons pushes the device back into the stand instead of tipping it off the desk\u003c\/p\u003e\u003cp\u003e✔ \u003cstrong\u003eCable exits to the side\u003c\/strong\u003e, keeping the charging lead out of your sight line and letting you run it off toward the back of the bench instead of looping across the screen\u003c\/p\u003e\u003cp\u003e✔ \u003cstrong\u003eBase is nearly as deep as it is wide\u003c\/strong\u003e, and the backward tilt sets the node's weight over that footprint rather than out in front, so a nudged antenna does not topple it\u003c\/p\u003e\u003cp\u003e✔ \u003cstrong\u003eSwappable front plate\u003c\/strong\u003e, printed as its own part and mounted to the front face of the body, so a new callsign or node name means a new plate rather than a whole new stand\u003c\/p\u003e\u003cp\u003e✔ \u003cstrong\u003eTwo-tone contrast\u003c\/strong\u003e between plate and body, so your text stays readable from across the room\u003c\/p\u003e\u003cp\u003e✔ \u003cstrong\u003eYour text exactly as you type it\u003c\/strong\u003e, capitalisation included, on a plate confirmed with you before printing\u003c\/p\u003e\u003ch4\u003e📦 What's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e1 desktop stand in your chosen colour\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e1 custom front plate with your text\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eDevice, antenna, and USB-C cable are NOT included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e🛠️ Details\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eMaterial: PLA, FDM printed at high infill for durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eMatte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eDimensions: 60 mm wide x 57 mm deep x 45 mm tall (about 2.4 in x 2.2 in x 1.8 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eWeight: about 50 g (1.8 oz) for the stand and front plate together\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eStand colours: Marine Blue, Mandarin Orange, Lemon Yellow, Ivory White, Charcoal, Ash Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003ePersonalization: one single line of text on the front plate (callsign, node name, handle, or short text), see the FAQ for length\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003ePlate colours and fonts: samples are shown in the photos, and I confirm the exact plate colour and font with you by message after you order\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eNo rubber feet fitted: the base is flat printed PLA, so add a couple of self-adhesive pads underneath if your desk surface is very slick\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eCare: wipe with a dry or slightly damp cloth, no solvents, no alcohol-based cleaners, not dishwasher safe\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eMade to order in Quebec, Canada\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e❓ FAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eQ: How many characters fit on the plate?\u003c\/strong\u003e A: There is no fixed character count, because the maximum depends on the font you choose: a short 6 character callsign fits comfortably in every font, and longer node names normally fit too, but a wide font runs out of plate sooner than a narrow one. If what you enter is too long for the font you picked, I message you before printing so we can shorten it or switch fonts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Can I order just a new plate if my callsign or node name changes?\u003c\/strong\u003e A: Yes. Message me with the new wording and I will print and ship a replacement plate on its own, so you keep the stand you already have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Will this fit my exact Wio Tracker?\u003c\/strong\u003e A: It is designed and tested for the Seeed Wio Tracker L1 Pro with the OLED display and built-in battery. Other variants (L1, L1 Lite, L1 e-ink) use different enclosures and are not tested. Message me with photos and dimensions if you have one of those and I will let you know whether it fits or can do a custom version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Will PLA hold up with the node docked and charging 24\/7?\u003c\/strong\u003e A: Indoors on a desk or shelf, yes: the L1 Pro's own warmth while charging stays well below the point where PLA softens. What PLA does not like is heat soak, so keep the stand out of parked cars, off sunny windowsills, and away from direct summer sunlight. If your node lives somewhere hot, message me and I can quote the same stand in a higher temperature material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Can you do multiple lines of text or a club logo?\u003c\/strong\u003e A: Yes, that is custom work rather than the standard single-line plate. Message me with the wording or artwork you would like and I will quote it.\u003c\/p\u003e\u003ch4\u003e⚠️ Please Note\u003c\/h4\u003e\u003cp\u003eEach stand is 3D printed to order, so slight layer texture is a natural characteristic of the process and colour may vary slightly between filament batches. If anything arrives damaged or does not fit your device, message me with photos for a replacement or refund.\u003c\/p\u003e","brand":"Innofenyx Design","offers":[{"title":"Charbon","offer_id":64274194792819,"sku":null,"price":22.95,"currency_code":"CAD","in_stock":true},{"title":"Gris Cendré","offer_id":64274194825587,"sku":null,"price":22.95,"currency_code":"CAD","in_stock":true},{"title":"Blanc Ivoire","offer_id":64274194858355,"sku":null,"price":22.95,"currency_code":"CAD","in_stock":true},{"title":"Bleu Marine","offer_id":64274194891123,"sku":null,"price":22.95,"currency_code":"CAD","in_stock":true},{"title":"Orange Mandarine","offer_id":64274194923891,"sku":null,"price":22.95,"currency_code":"CAD","in_stock":true},{"title":"Jaune Citron","offer_id":64274194956659,"sku":null,"price":22.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/0244\/8499\/files\/91b0626f546f4c2784e184b3cac54f86.jpg?v=1787268303","url":"https:\/\/www.innofenyx.shop\/fr\/products\/wio-tracker-l1-pro-meshtastic-stand","provider":"Innofenyx Design","version":"1.0","type":"link"}